.png)
Axial Search Coil
The Axial Search Coil consists of 5000 turns of very fine copper wire on a bobbin fixed at one end of fibreglass board (electrically insulated and non magnetic), and on the other end two 4 mm socket terminals are fitted. It can be used to determine field strengths or flux density inside the air gap of magnets or solenoids. An a.c. or d.c. signal can be applied to the search coils to study the effect of interacting magnetic fields. Coil mounted with its axis parallel to the axis of the PCB board.
Signal Generator also required for use (PP00051868 or similar).
- A Lateral Search Coil is also available to purchase separately (B8R07038).
Description
The Axial Search Coil consists of 5000 turns of very fine copper wire on a bobbin fixed at one end of fibreglass board (electrically insulated and non magnetic), and on the other end two 4 mm socket terminals are fitted. It can be used to determine field strengths or flux density inside the air gap of magnets or solenoids. An a.c. or d.c. signal can be applied to the search coils to study the effect of interacting magnetic fields. Coil mounted with its axis parallel to the axis of the PCB board.
Signal Generator also required for use (PP00051868 or similar).
- A Lateral Search Coil is also available to purchase separately (B8R07038).
Specifications
IN
60104909
1.15kg
40mm
110mm
350mm
Axial
Electricity & Electromagnetism
Magnetism
